premium quality ,premium services
Duplex Stainless Steel
Nickel Alloy
Stainless Steel
Super Austenitic Stainless Steel
Hastelloy
Stainless Steel Seamless Pipe
Stainless Steel Bar
Carbon Steel Pipe
Galvanized tube
Alloy Steel
Coated Steel Material
304 Stainless Steel Coil
 

jimmyni@yikaisteel.com
   

   
TEL:0086-15345496442

FAX:021-61524170
 News Center  
Home > News Center 
Super Duplex Steel 

The first-generation Duplex stainless steels were developed more than 70 years ago in Sweden for use in the sulfite paper industry. Duplex alloys were originally created to combat corrosion problems caused by chloride-bearing cooling waters and other aggressive chemical process fluids. Called Duplex because of its mixed microstructure with about equal proportions of ferrite and austenite, Duplex stainless steels are a family of grades, which range in corrosion performance depending on their alloy content.

The term "Super-Duplex" was first used in the 1980's to denote highly alloyed, high-performance Duplex steel with a pitting resistance equivalent of >40 (based on Cr% + 3.3Mo% + 16N%). With its high level of chromium, Super-Duplex steel provides outstanding resistance to acids, acid chlorides, caustic solutions and other environments in the chemical/petrochemical, pulp and paper industries, often replacing 300 series stainless steel, high nickel super-austenitic steels and nickel-based alloys.

The chemical composition based on high contents of chromium, nickel and molybdenum improves intergranular and pitting corrosion resistance. Additions of nitrogen promote structural hardening by interstitial solid solution mechanism, which raises the yield strength and ultimate strength values without impairing toughness. Moreover, the two-phase microstructure guarantees higher resistance to pitting and stress corrosion cracking in comparison with conventional stainless steels. From the introduction of its first-generation, Duplex steel has seen a steady increase in popularity.

Recently, the production of high-strength, corrosion resistant super-duplex coil has been implemented in the marine and chemical industries, architecture and mast riggings, wire lines, lifting and pulley equipment and well service strands. In fact, development of wire processing techniques has enabled the production of steel wires down to 1mm in diameter.

 

Email:jimmyni@yikaisteel.com

www.yikaisteel.com

Last:Steel price in India are expected to grow again
Next:Latest Price for 304 Stainless Steel Coil
Date:2012/11/16 ã€Print】ã€Close】

 

 

© 2003-2012 Shanghai Yikai Metal Products Co.,Ltd All rights reserved.   
Home | About us | Products | Case resources | Service | News center | Contact us
上海镒凯 2019-4-30 10:21:25
< a href="http://www.365webcall.com/">Online customer service
< a href="http://www.365webcall.com/">Online customer service system