Inconel 600 Wire

Inconel 600 Description

Inconel 600 is a nickel-chromium alloy designed for use from cryogenic to elevated temperatures in the range of 2000 F degree (1093 C degree). It is non magnetic and readily weldable.It is used in a variety of corrosion resisting applications. The high nickel content of the material provides exceptional resistance to chloride stress corrosion cracking.

Chemistry Typical(%)

Nickel + Cobalt......  .. 72.0 min.
Chromium..............  ..14.0-17.0
Iron............................6.00-10.00
Carbon..................  ...0.15 max.
Manganese........ ..  ...1.00 max
Sulfur.........................0.015 max.
Silicon.................  .....0.50 max.
Copper................  .....0.50 max

Forms

Wire-Profile, Round, Flat, Square

Coil-Strip, Foil, Ribbon

Wire diameter 0.1mm-15mm

Mechanical Properties at Room Temperature

Annealed
Ultimate Tensile Strength: 80 KSI min (552 MPa min)
Yield Strength: (0.2% offset) 35 KSI min (241 a min)
Elongation: 30% min ( gauges > 0.010 inches)

Welding of Inconel 600

Any traditional welding procedures can be used to weld Inconel 600 to similar alloys or other metals. Before welding, preheating is needed and also any stain, dust or mark should be cleared by steel wire brush. About 25mm width to welding edge of base metal should be polished to bright.

Recommend filler wire regarding welding Inconel 600: ERNiCr-3