Hastelloy C276 Wire

Hastelloy C276 alloy is a nickel-molybdenum-chromium wrought alloy that is generally considered a versatile corrosion-resistance alloy. C276 alloy is an improved wrought version of alloy C in that it usually doesn't need to be solution heat-treated after welding and has vastly improved fabricability. This alloy resists the formation of grain-boundary precipitaties in the weld heat-affected zone, thus making it suitable for most chemical process applications in the as-welded condition. However, in environments where attack of the C276 alloy weld joint is experienced, C-22 weld filler materials should be considered.

C276 alloy has excellent resistance to localized corrosion and to both oxidizing and reducing media. Because of its versatility, C276 alloy can be used where "upset" conditions are likely to occur or in multipurpose plants.

HASTELLOY C276 alloy has excellent resistance to a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, hot contaminated media (organic and inorganic), chlorine, formic and acetic acids, acetic anhydride, and seawater and brine solutions. It is used in flue gas desulfurization systems because of its excellent resistance to sulfur compounds and chloride ions encounted in most scrubbers. C276 alloy has excellent resistance to pitting and to stress-corrosion cracking. It is also one of the few materials that withstands the corrosive effects of wet chlorine gas, hypochlorite, and chlorine dioxide.

Chemical Composition, %

Hastelloy c276 wire dimension

Diameter: 0.5mm-8mm

Surface finish: bright, annealed.

Fabricated by a Variety of Methods
HASTELLOY C276 alloy can be forged, hot-upset, and impact extruded. Although the alloy tends to work-harden, it can be successfully deep-drawn, spun, press formed or punched. All of the common methods of welding can be used to weld HASTELLOY C-276 alloy, although the oxyacetylene process is not recommended. Special precautions should be taken to avoid excessive heat input.

Detailed fabricating information is available in the booklet, "Fabrication of HAYNES Corrosion-Resistant Alloys". Ask for booklet H-2010.

Available in Wrought Form
HASTELLOY C276 alloy is available in the form of plate, sheet, strip, billet, bar, wire, covered electrodes, pipe, tubing, pipe fittings, flanges, and fittings.

Heat-Treatment
Wrought forms of HASTELLOY C-276 alloy are furnished in the solution heat-treated condition unless otherwise specified. C-276 alloy is normally solution heat-treated condition unless otherwise specified. C-276 alloy is normally solution heat-treated at 2050 F degree (1121 C degree) and rapid quenched. If possible, parts which have been hot-formed should be solution heat-treated prior to final fabrication or installation.

Applications:

Pollution control stack liners, ducts, dampers, scrubbers, stack-gas reheaters, fans and fan housings
Flue gas desulfurization systems
Chemical processing components like heat exchangers, reaction vessels, evaporators, and transfer piping
Sour gas wells
Pulp and paper production
Waste treatment
Pharmaceutical and food processing equipment