304 Stainless steel sheet
Shanghai Yikai Metal Co. offers a diverse range of Stainless Steel Flat Rolled Products which are available in Plate, Sheet and Coil.
The most common grades of Stainless Steel Sheets that we offer are 3CR12, 430,
304 and 316. Grade types such as 409, 410, 444, 309, 310s, 321, 347, 321, 904L,
2205, 2304, 316Ti, 316H, 317L are all available on request. Stainless Steel Sheets, also commonly known as Cold Rolled products, are
available in the following finishes: 2B, No.4 with PVC and BA with PVC. Material
can also be polished to your requirements. See stainless steel decorative finishes. Stainless Steel Sheets Standard lengths (in mm) are: 2000, 2500, 3000 and 6000.
Standard widths (in mm) are 1000, 1250 and 1500. All material is produced to the
following international specifications: tolerance to ASTM A480m, chemical to ASTM
A240 91A, mechanical to ASTM A240 91. Test certificates are supplied on all
material delivered.
Density factors used for weight calculations: under 3 mm thick Austenitics (such as
304 and 316) 8,07; Ferritics (430 and 3CR12) 8,00. Products over 3mm (hot rolled
product) or a No.1 finish use a density factor of 8.2 - this applies to Austenitic and
Ferritics. Calculate sheet mass as follows length (m) x width (m) x thickness (mm) x
density factor.
Shanghai Yikai Metal also offers in house cutting to length, brushing (No4 polishing) and blanking to size.
|